Solar Products
Solar Reference Cells


 
Solar Reference Cell for solar simulator standards
 
Solar Reference Cell monocrystalline silicon PV reference cell
 

LET YOUR ACCURACY SHINE! The Solar Reference Cell from VLSI Standards is designed for calibrating the irradiance of solar simulator standards used for testing solar cells and solar modules.

Solar Reference Cells Product Description

The Solar Reference Cells come with a Certificate of Calibration and compatible set of connecting cables. The following parameters of the PV reference cell are certified: Isc, Imax, Voc, Vmax, Pmax, Area, Fill Factor and Efficiency. The Certificate of Calibration is accredited by NIST to the ISO-17025 standard and is traceable both to the National Renewable Energy Laboratory (NREL), and to the International System of Units (SI). A compatible cable set is also supplied with each Solar Reference Cell.

The Solar Reference Cells come with a Certificate of Calibration and compatible set of connecting cables. The following parameters of the reference cell are certified: Isc, Imax, Voc, Vmax, Pmax, Area, Fill Factor and Efficiency. The Certificate of Calibration is accredited by NIST to the ISO-17025 standard and is traceable both to the National Renewable Energy Laboratory (NREL), and to the International System of Units (SI). A compatible cable set is also supplied with each Solar Reference Cell.

Optional temperature dependence measurement of Isc, Voc and efficiency between 20°C and 30°C is also available.

Solar Reference Cells Product Specifications

  • Photovoltaic material:
    monocrystalline silicon

  • Photovoltaic device dimensions:
    20 mm x 20 mm

  • Window material, choose from:
    Quartz, KG1, KG2, KG5, RG610

  • Enclosure material:
    anodized aluminum

  • Enclosure Dimensions:
    92mm x 70mm x 16 mm

  • Temperature sensor:
    100 ohm Pt RTD or Type K thermocouple

  • Current - voltage connector:
    LEMO ERA.0S.304.CLT

  • Temperature connector:
    LEMO ERA.0S.304.CLT (for RTD) or
    Omega SMPW-K-F (for thermocouple)

  • Cable Set:
    Compatible for use with corresponding
    current-voltage and temperature sensor
    connectors.

  • Calibration irradiance:
    1000 W/m2 (1 sun)

  • Operating current:
    Less then 200 mA

  • Operating temperature
    10°C - 40°C

Products  |  Recertification  |  ISO & QS Support  |  Company  |  Contact  |  Home